Curved tube pressure balance expansion joint OEM Welcome ISO 9001 Certification
Product introduction
A curved pipe pressure balance ripple compensator (QYP) is a device installed on a pipe at a bend in a pipe or in a space connected to the device. It is commonly used in pumps, compressors, steam turbines and other load-sensitive piping systems.
Instructions:
The curved pipe pressure balance ripple compensator is installed on the curved pipe or the connected space pipe.It can compensate the axial displacement, lateral displacement, without the pipe system or other equipment internal pressure thrust.It can absorb vibration and reduce noise to ensure safe operation of equipment.
Curved tube pressure balance type ripple compensator type meaning
The type of the compensator is 0.6YGQPB800× 8/6fb, which represents a pressure of 0.6mpa, diameter of 800, the wave number of the working bellows is 4+4, the beam of the balance bellows is 6, and the curved pipe pressure balance type ripple compensator connected with stainless steel flange is adopted.
Application description of curved tube pressure balance type ripple compensator
1. bend pressure balance type corrugated compensator is in accordance with the national standard GB/T12777-2008, using computer software to optimize the professional bellows, such compensator is due to the special manufacture process and working principle of can be applied to petroleum and petrochemical, steel, thermal power and other industries, installed in the corner of the whole piping or piping connected to equipment space.It can compensate the axial displacement, lateral displacement, because it can balance the internal pressure thrust without additional load on the whole relationship or equipment;
2. curved pipe pressure balance type ripple compensator is often used in pumps, compressors, steam turbines and other relatively sensitive to the load of the pipeline system.It can reduce the vibration caused by starting and stopping, and plays the function of reducing vibration and noise, so as to ensure the normal and safe operation of piping and equipment.
3. When the curved pipe pressure balance type ripple compensator is used in the exhaust pipe of the steam engine in the power plant, the exhaust pipe of the compressor or the petrochemical process pipeline, the accurate operating parameters must be provided in order to design the most suitable compensator;
4. The large pull rod of the curved pipe pressure balance corrugated compensator is a structural member under pressure. When the compensator is transversally displaced, the large pull rod will have a certain deviation from the end plate.
5. If the curved pipe pressure balance type ripple compensator needs to be arranged with the inner guide tube, the movement direction of the medium shall be provided when ordering, so as to determine the direction of the guide tube;
6. The small tie rod on the curved pipe pressure balance type ripple compensator is a transport part and cannot be used as a component to bear pressure. The compensator must be removed after installation
Product Tags:
|
|
Curved Tube Pressure Balance Expansion Joint OEM Welcome ISO 9001 Certification Images
|
